Netgear routers have set the bar too high when it comes to accessing a seamless internet. High-speed Internet lets you watch movies online and play games online. But, it becomes irritating when internet connection drops suddenly. Millions of Netgear users are facing this problem. If you are also facing the Netgear Wi-Fi not working , problem, then we have a solution for you. In this article, we are going to reveal all the reasons why your Netgear router is not working and how to fix the problem. Continue reading.
Here are the reasons why your WiFi router is not working:
Insufficient power supply.
Incorrect placement of Netgear router.
Bad connection between router and modem.
Partial routerlogin.net setup
Outdated or corrupted firmware.
Now that you know the reasons for the problem, let's discuss some troubleshooting tips that can help you fix it.
Check the power outlet
If your Netgear router stops working suddenly, it may be due to an inadequate power supply. Check if the power outlet you connected your WiFi device to is working or not. Also check the power light status of your router. If it is green, it means the WiFi router has enough power.
If the power light is flashing or amber, restart your Netgear Wi-Fi router. Maybe restarting will fix the problem for you. If the problem persists, plug your Netgear router into another wall outlet.
Place your Netgear router correctly
Is your Nighthawk router in its ideal location? Probably not. If you have placed your WiFi device in blind spots, the router will have trouble amplifying WiFi signals from your modem Instead, place the router in a well-ventilated area. The benefit of placing your router in an open space is that it won't overheat from excessive use. In addition to this, consider the following points to properly place your WiFi device:
Place your Netgear router within range of the modem. It would be a wise decision to place both devices in the same room.
Avoid placing your WiFi device near a corner or concrete wall.
Do not place your Netgear Wi-Fi router near reflective surfaces, Bluetooth devices, and electronic gadgets. This will prevent WiFi signal interference from your device.
Connect the router and modem correctly
If you have not properly connected your router and your Netgear modem, this can also cause the router not to work properly. Therefore, stabilize the connection between the two devices. If you connected them wirelessly, change the connection to a wired connection. Use an Ethernet cable to connect the two devices. But make sure the connection is strong and secure. Avoid using a damaged Ethernet cable.
Reset your router
If the troubleshooting tips mentioned above didn't work for you, don't feel unlucky. You can still fix the problem. All you need is to restore your Netgear router to factory default settings. So, grab a pin-shaped object and press the Reset button on your WiFi device. As soon as you release the reset button, the router will be restored to factory default settings. Now do the router configuration from scratch by going to the Netgear Nighthawk Router Login page.
This was to fix the Netgear router not working issue. We hope you are able to fix the problem and regain uninterrupted Internet access by following the troubleshooting tips in this article.
